Lightings are generally clean blind spots. If you do not pay attention to the cleaning of lamps, it will reduce the practical life of lamps and will have an impact on aesthetics. Want to be bright at home! Let’s clean the lamps at home!

The four major maintenance techniques for lighting are to make the home bright and the correct installation is the prerequisite for extending the service life of the lamp. If not installed correctly, the lamps will easily break down and sometimes even explode, which is very dangerous. In the home, you should be especially careful when installing the lamps in the bathroom (decoration renderings) and kitchen (decoration renderings).

The lamps in the bathroom must be equipped with moisture-proof lampshades, otherwise the service life of the lamp will be greatly shortened; kitchen lamps should pay special attention to preventing oil smoke, because the accumulation of oil and dirt will affect the lighting of the lamp; and light-colored lampshades have better light transmission, but are prone to ash, so you should wipe them diligently to avoid affecting the penetration of light; and generally speaking, do not allow kitchen and bathroom lamps to be placed in a position where water vapor is prone to condense to avoid bursting.

Aging lamp tubes are replaced early

The lamp tubes that have been used for a long time will turn red or have black shadows. At this time, it should be replaced in time. The purpose is to prevent unsafe phenomena such as burning the ballast. Generally speaking, when purchasing lamps, the effective time will be indicated on the lamp. Regular replacement of aging lamps is very helpful for the overall lamp maintenance.

Cleaning method should be correct. After the lamp is used for a period of time, a thick layer of gray will be deposited on it, which will affect our vision, so regular cleaning cannot be avoided. Then during the cleaning process, be careful not to change the structure of the lamp, nor to replace the components of the lamp casually. After the cleaning and maintenance, the lamp should be installed as it is, and do not misinstall or misinstall the lamp parts.

Generally, wipe the lamps with a dry cloth and pay attention to prevent moisture from invading. If the lamps are non-metal, wipe them with a wet cloth to avoid dust accumulation and hinder the lighting effect.

Frequent switching of lights are the most harmful. Do not switch frequently when using lamps, because the current through the filament at the moment of frequent start-up is greater than the current during normal operation, which causes the filament temperature to rise sharply and accelerate and sublimate, which will greatly reduce its service life. Therefore, the switch of the lamp should be minimized.

Lamps are important decorations for the family, and whether they are easy to use is related to the quality of home life. But generally speaking, many people don’t care much about the maintenance of lamps. Even if the lamps are broken, they will think it is a quality issue. In fact, there are certain rules when using or installing lamps. If used according to the rules, the service life of lamps will be very long.

In fact, maintaining lamps is not a very troublesome thing. Pay attention to cleaning in daily life, and the lighting decoration effect will be better!