When washing mops, you should also pay attention to the fact that any mops of any material must be cleaned with neutral detergent. As a cleaning tool, it is best to clean it. It is best to put some disinfectant water to disinfect it. How to change the mop head? There are several types of mop selection and maintenance

How to change the mop head, basically the mop head and the pole can be separated, just twist the mop head off. Here are a brief introduction to several installation methods of mop heads:

Rotate the mop head

First, put a connecting widget on the mop rod, and then put the mop rod into the mop disk. Then circle the connector and mop tightly, and do not loosen. Finally, put the handle into the mop rod. The process will not be very complicated. You can follow the diagram below to operate by yourself. If you don’t understand anything, you can find the after-sales service of your mop expert, which I believe can be solved perfectly. Next is the installation of the cotton head. First, aligning the mop plate with the cotton head plate and pressing it down vertically. Then lightly press the cotton tray with your toes to make a joint sound, so the installation is complete. Finally, when the mop rod and the cotton cloth are in a vertical state, press the cotton head with one foot and press the mop rod by obliquely, and the replacement can be easily completed. Isn't it very simple? I believe that according to the instructions, everyone can easily replace the rotating mop head.

Roller sponge mop head change:

Roller water-squeezing cotton head generally has four screw holes, and the hole spacing of the four screw holes is also commonly used. Generally, cotton heads of the same length can be used on different mops. The function of the four screw holes is to connect the left and right hooks of the mop and the cotton head through the screw hole

Folding sponge mop head replacement method

Folding patch type mainly involves attaching two ABS plastic sheets at the bottom of the cotton head. When installing the cotton head, just snap the four feet on the patch into the slot at the bottom of the cotton mop. It is easy and quick to replace the cotton head. When removing the cotton head, just hold the middle of the cotton head with your right hand and gently push it back, and the cotton head will be removed. The opposite method is used to install the cotton head.

Mop Selection and Maintenance

Selecting the appropriate mop to work in cleaning can bring work efficiency, performance and value to the highest point. Seven principles for choosing mop:

1. The handle is easy to hold and not easy to fall off and rotate.

2. The mop has good water absorption.

3. The floor mop material does not remove shavings.

4. The mop is easily wrung out and does not consume any effort.

5. The mop is easy to remove dirt and does not stick to dirt.

Different requirements are different to choose different functions, such as: the gap under the furniture is small, and you can choose a flat-type mop (the mop cloth can be removed and cleaned, such as dust holder). 7. Do not occupy space for home space storage: When the space area is small, choose a composite mop with mopping function.

When purchasing, you should also pay attention to the color of the mop plastic parts. The plastic parts are made of an injection molding machine, and color powder is inserted into the injection molding particles and the molding is produced at high temperature. There are two colors to be carefully identified. One is black. The black plastic parts can be mixed with processing material or waste, which has poor toughness. The other type is gray, which can also be mixed with recycle materials, with a smaller proportion than black. Remove the above two color materials, if the color of the plastic purchase is pure, it can be judged that it is made of new materials and has a strong fastness.

You should also pay attention to maintenance when using the mop:

1. After cleaning, be sure to rub and wrung and place it in a ventilated place to avoid odor.

2. When there is a odor of the mop, you can use diluted bleach to clean the mop.

3. When there is hair stuck on the mop, you can use a brush to help remove it or use tape to remove it when it is waiting for it to dry.

4. In order to keep the home clean and hygienic, it is recommended to thoroughly clean or replace the mop head every two to three months.

5. When used with detergent, do not have too much portion, otherwise it will easily remain and affect the mop.

Advantages and disadvantages of different mops

According to the material and performance, it can be divided into: glue cotton mop head, fiber mop head, cotton mop head

Glue cotton mop head:

Glue cotton has strong water absorption. You can do not need to sweep the floor before mopping. Static electricity is formed through the convection and friction of air, which can absorb dust, sand, and hair without damaging the ground. When using, your hands do not need to be dipped in water or dirt, and they are simple and clean. Especially when replacing the rubber cotton mop head, it is economical and affordable. The disadvantage is that due to the limitation of shape (bars), it is difficult to rub narrow gaps.

Cotton mop head:

Cotton material prefers dryness, and more precisely, it can show its advantages when used on wooden floors. Once the cotton drag head is wet, it will be difficult to clean the hair attached to it. After rubbing one piece and then rubbing another place, there will be a mark, and the black mark will not be wiped clean. The fine items stick to the mop, and then mop the floor and then take them to the ground, and then they have to be swept. . So try to mop the cotton mop as dry as possible. Moreover, before mopping the floor, it is recommended to clean the hair on the floor or vacuum clean it.

Fiber mop head:

Microfiber material mop is more expensive because it adopts a relatively special process. The flat-type tow head can contact the ground vertically, which changes the disadvantage of the cotton thread in parallel with the ground. Since you can "intimate contact" with the ground, friction produces static electricity, so you can more thoroughly remove dirt in the gaps. Wipe the ground without any wear, and can also be used for polishing and waxing. But you need to wash the mop with your hands or the washing machine.

Use of mops

1. In order to extend the efficiency of mops, it is best to clean the hair and dust before mopping the floor.

2. Try to follow the texture of the floor as far as possible to remove the dirt tape and achieve the cleaning effect.

3. It is best to rinse the mop with running water. If you have the habit of using floor cleaners, a dirty mop can be washed away first under the faucet, then soaked in a bucket containing the cleaner, and then wrung and mop the floor..

4. Pay attention to the use of various types of mops. Only by using the right method can you improve the efficiency of mops. For example, if there is a glue cotton mop, you must soak it in water before it can be used after it is dry and hard, or some electrostatic cloth mops need to be sprayed with electrostatic fluid before it can be used.

5. Use a mop to wipe the wood floor, and try not to use mops with high moisture content, such as microfiber mopping. It is recommended that you use a dust drying bracket. Because the surface of wooden floors has capillaries and pores, it is easy to absorb water, which causes the floor to be deformed and fragile and shortens its life.

Mop should also be careful when washing, and any mop of any material should be cleaned with neutral detergent. As a cleaning tool, it is best to clean it. It is best to put some disinfectant water to disinfect it. But not all mops can be sunbathed. Generally, mops of microfiber, non-woven fabrics and glue cotton materials need to be dried. If the sun is sunny, the material may shrink and deform, and the adsorption effect will be weakened. The cotton mop will have to be sunbathed because it will cause hair loss and odor.