Maintenance and cleaning of children's beds - purchasing knowledge of children's beds

1. Reference size for purchasing children's beds

1. The size of preschool baby beds is mostly between 1000-1200mm, the width is about 650-750mm, and the height of the bed is about 400mm. When the school-age stage, the design of children's beds can be basically considered in reference to the adult bed. The net length of the bed is generally 1920mm and the width is 800mm, 900mm and 1000mm. The paving height is preferably between 400-440mm.

2. When purchasing a raised bed, pay attention to the size of the bottom bed to the top bed. Generally, the net height between layers should not be less than 950mm to ensure that the baby has sufficient range of movement and will not touch his head frequently.

2. Three-dimensional space-use bed

If your children's room is not big, in order to give your baby more play space, bunk beds that make full use of the space are also a good choice. The lower level is for the baby to sleep, the upper level can become a place for the baby to entertain, and various toys can be stacked to facilitate the elderly or nanny to take care of the baby. But for young and unhonest little guys, the bunk bed seems to be dangerous. Mommy can choose to install a guardrail and install one for the baby when needed to cover it.

3. The bed that will grow up cannot be replaced every two or three years as a large piece of furniture, and the baby is constantly growing. If you want to choose a children's bed that can meet the needs of your children at all times, it is wise to choose a bed with a foldable head and tail plate that can adjust and lengthen.

4. Children aged 3-6 have a lot of toys and clothes. Therefore, when purchasing, you should pay attention to storage functions. It is a good idea to configure a children's bed with drawers and cabinets under the bed. It can store clothes, put small toys inside, and stuff some bedding, put in something that is not commonly used, reducing the mess in the house.

5. Freely combined beds

Baby likes to change. So it is also very good to have a bed that can adapt to the baby's different growth periods and combine countless different layout plans. A basic bed can be turned into a raised bed, up and down bed, an l-shaped bed, and a single-shaped combination, and can also be transformed back to its original state. At the same time, the bed and slide, desk, wardrobe, bookshelves, tents, etc. can also be combined in various ways.

6. Safety is the hard truth. Note that the bed chosen for the baby should be relatively low and close to the ground: the short bed is convenient for the baby to go up and down, and if it accidentally rolls off the bed, it will not be seriously injured. Since the baby is in the stage of being lively and active and curious, it is prone to accidents, and safety is of course a key consideration for parents.

1. Children's beds should try to avoid the appearance of edges and corners, and the edges should be closed by arcs.

2. The corners should be smooth to the touch with your hands and there should be no dangerous objects such as wooden thorns and metal nails.

7. Pay special attention to whether the materials used in the bed are environmentally friendly. Logs are the best materials for making children's furniture. At present, the main materials used as children's beds include wood, artificial boards, plastics, aluminum alloys, etc. Logs are the best materials for making children's furniture. The materials are natural but will not produce chemicals that are harmful to the human body. When using paint, you should choose lead-free, non-toxic and non-irritating paint. It is best to buy children's beds from well-known brands when purchasing, especially children's beds with strong stimulation and odor. If the irritation makes people cry, it means that the formaldehyde content is seriously exceeding the standard.

8. Ensure the firmness of the bed. The baby is naturally active. They always like to jump up and down on the bed, so parents should make sure the bed is stable and there is no risk of collapse; they should choose durable beds with strong damage resistance, and regularly check whether the junction of the bed is firm, especially for beds with metal frames, where screws are easily loosened.

Cleaning of children's bed

1. Get up in the morning and lift up the bed sheets for a few hours to let the mattress breathe fully.

2. Use a soft brush to gently swipe the surroundings of the mattress to remove floating soil.

3. It is best not to use a vacuum cleaner. The dust inside the mattress generally cannot penetrate the surface liner material and be sucked out.

4. Using mattress protective covers is a simple and effective method, and regular cleaning is the most hygienic.

Maintenance of children's beds

1. Regular flip mattresses, it is recommended to regularly change the direction of the mattress to maintain comfort. The mattress contains multiple layers of inner mattresses to extend comfort and enhance support functions. For new mattresses, there are often human indentations, which indicates that the upper cushion layer plays a comfortable role in matching the body shape. To reduce human indentation, please occasionally change the placement direction of the mattress during the mattress service period. For the oversized spring mattress, there is currently a flip-free design, which is very practical for single and weak families.

2. Do not fold when handling children's mattresses. Excessive bending will damage the internal spring system. When passing through the door, you can bend the mattress slightly instead of over-folding. When laying sheets, be careful not to bend the corners of the mattress.

3. Create a comfortable indoor environment. Choose thick curtains and do not let light penetrate the doors and windows. Room temperature is 18 degrees Celsius the most suitable. It is best to open the window for a while before going to bed and close it when going to bed. Ventilation will not only remove unhealthy substances from the bedroom from the room, but also expel the carbon dioxide we exhaled during sleep from the outside. These exhaust gases will directly affect your sleep quality.